¾”Natural Gas Vapor Hose
This hose is designed to go between the Generator connected
to the low pressure Regulator and the Natural gas meter
Do not attempt to connect the vapor hose to the
Natural gas meter, you will need to contact a
licensed professional
WARNING NATURAL GAS IS HIGHLY COMBUSTIBLE
Our Natural gas hose setup comes with
(2) ¾” NPT female x ¾” female quick connects
(2) ¾” NPT male ¾” male quick connects
Parker Hannifin & Goodyear hoses are highly engineered products that meet or exceed a
variety of industry standards and is the only hose that PNG sales. It is not recommended to
use a hose meant for a barbecue or a fireplace. Generators demand high volumes of gas to
run, just remember you are supplying gas to a combustible engine not an appliance.
Male wrong
will not work
PLEASE READ ABSOLUTELY NO RETURNS ON CUSTOM MADE NATURAL GAS HOSES
Click on the button below for
purchasing options from 5 ft to 100 ft
Business Hours: 8:00AM - 5:00PM M - F
QUICK CONNECT DUST CAP
3/4" Dust Cap for ¾” Quick Connects
This dust cap fits
on the outside of the male end
and inside of the female end
In order to protect both ends
four dust caps are required
Customer Service:(734)992-2648
Quantity 1 in the cart will be a
group of four dust caps
Female correct
will work
Male correct
will work
Female wrong will
not work
In order for your Generator or Inverter to run
correctly with Natural gas the inside diameter
of your Quick Connects can be no smaller than
¾” in size. If your Quick Connects look like these
to the right your Generator or Inverter
WILL NOT RUN CORRECTLY
The Quick connects must be open flow
like the pictures to the left in order for the
Generator or Inverter to receive the proper
amount of Natural gas to support it’s
combustible engine.
It doesn’t matter where you obtain the Quick
Connects from, what matters is the inside
Orifice must be sufficient in order to deliver
the proper amount of fuel
PNGTechnologies, Romulus,MI
¾”Natural Gas Vapor Hose
This hose is designed to go between the Generator connected
to the low pressure Regulator and the Natural gas meter
Do not attempt to connect the vapor hose to the
Natural gas meter, you will need to contact a
licensed professional
WARNING NATURAL GAS IS HIGHLY COMBUSTIBLE
Parker Hannifin & Goodyear hoses
are highly engineered
products that meet or exceed a
variety of industry standards and is the only
hose that PNG sales. It is not
recommended to use a hose meant
for a barbecue or a fireplace.
Generators demand high volumes of gas
to run, just remember you are supplying
gas to a combustible engine not an appliance.
PLEASE READ ABSOLUTELY NO RETURNS
ON CUSTOM MADE NATURAL GAS HOSES
QUICK CONNECT DUST CAPS
3/4" Dust Cap for ¾” Quick Connects
This dust cap fits
on the outside of the male end
and inside of the female end
In order to protect both ends
four dust caps are required
Quantity 1 in the cart
will be a
group of four
dust caps
Our Natural gas hose setup comes with
(2) ¾” NPT female x ¾” female quick connects
(2) ¾” NPT male ¾” male quick connects
Click on the button below for
purchasing options from 5 ft to 100 ft
In order for your Generator or Inverter to run
correctly with Natural gas the inside diameter
of your Quick Connects can be no smaller than
¾” in size. If your Quick Connects look like the first
set of pictures below your Generator or Inverter
WILL NOT RUN CORRECTLY
The Quick connects must be open flow
like the second set of pictures below in order
for the Generator or Inverter to receive the proper
amount of Natural gas to support it’s
combustible engine.
It doesn’t matter where you obtain the Quick
Connects from, what matters is the inside
Orifice must be sufficient in order to deliver the
proper amount of fuel
Male wrong
will not work
Female wrong will
not work
Female correct
will work
Male correct
will work
Business Hours: 8:00AM - 5:00PM M-F
